Warrior

Functional Spear Head is hand forged from steel, wooden pole available. Approximately 77" Overall length

Functional Spear Head. Hand forged from carbon steel, with a rough hammered finish. This spear has new options for either a sharpened, blunted or reinforced safety tip for re-enactment use.

Functional Spear Head hand forged from carbon steel, with rough hammered finish. New options sharpened, blunted or reinforced safety tip for re-enactment use. 19 1/2in long, 2 1/4in wide. The weight is approximately 2 lbs.

The Spear Spike Axe was quite handy. A good sharp point, the hammer or spike could pierce armor and the axe head was lethal. This Spear Spike Axe has a high carbon blade. 

Our Special Ranger Western Badge Cattle was reproduced from existing originals. The badges of the Old West are crafted in silver plated solid brass with sturdily mounted pin fasteners. Great for the Western reenactor.

Spider-Girl Teen Costume is from our Women of Marvel Collection.

With our Spider-Man Accessory Kit (Adult) you'll surely be catching thieves just like flies.

With our Spider-Man Bunting Infant Costume this little Spider-Man may not look scary, but his adorable looks could melt any evildoer’s heart!

The Spiked Monkey Wrench from Epic Armoury is a 19.7 inch (50 cm) improvised weapon perfect for your next post-apocalyptic live action roleplay (LARP) adventure. This foam wrench with a nail stuck in the jaws is a safe yet formidable option when battling the walking dead.

The Spiked Monkey Wrench from Epic Armoury is a 19.7 inch (50 cm) improvised weapon perfect for your next post-apocalyptic live action roleplay (LARP) adventure. This foam wrench with a nail stuck in the jaws is a safe yet formidable option when battling the walking dead.

Our Spiked War Club is Simple, Functional, brutal and effective, 19 1/2" long hardwood shaft and steel spikes.

Our Spiked War Club is Simple, Functional, brutal and effective, hardwood shaft and steel spikes. 19" overall length.

Our Spinning Steampunk Gear Button adds a dimension of movement to your Steampunk gear. Buttons measure 1 1/4 inches in diameter. Each of the Steampunk Gear Buttons are cast from lead free pewter in the USA.

Our Spiral Heart Flags feature a string of 7 flags, 13”x 14” each. Spiral into the dance of the open heart and awaken your limitless potential.

Our Spirit Incense Stick 20 Pack is a high quality, handcrafted, charcoal based incense cones. Softly scented & even burning. Crafted so as to possess a close connection to the spirit realm, our Spirit incense sticks fill any room in which they burn with a sweet smoke. Approx. 20 Sticks per package.

Our Spirit Incense Stick 100 Pack is a high quality, handcrafted, charcoal based incense cones. Softly scented & even burning. Crafted so as to possess a close connection to the spirit realm, our Spirit incense sticks fill any room in which they burn with a sweet smoke. Approx. 100 Sticks per package.

Our Spirit Wall Collage Plaque emerges from the swirling vortex of four elements; a seed, a Shiva lingam, an omphalos, a world, a galaxy, a soul, the divine. Life, death, rebirth, all life, all creation, all time are symbolized here.

Our Sporran Wedge Pewter Flask 6 Ounces measures 4.72 inches tall by 3.54 inches wide. It is difficult to miss the fact that this wonderfully designed pewter hip flask is designed to celebrate everything Scottish.

Ths Sport Combat Bascinet is constructed from 16 gauge stainless steel. The visor is articulated and can be raised. The interior of the helmet is blackened and unlined and has plenty of room to install your own padding.

This Sport Combat Bearded Helmet is built specifically for medieval sport combat; it is constructed from riveted and welded stainless steel and features a thick bar grill for the face. The hinged grill is secured with a pair of hooks and it can be raised as needed.

The Kingston Arms Sport Feder is a purpose-built HEMA longsword designed for club sparring and practice. This lightweight and agile sword offers a balance of safety and performance, making it ideal for both beginners and experienced practitioners.

The Sports Nasal Bearded Helmet is a type of helm used in the Society for Creative Anachronism (SCA) events, inspired by the historical Norman helmet design. It features a bar-grill, nasal, cheek guards, and neck guard for protection.

The Spring Sakura Katana, forged by Dragon King, is a masterfully crafted samurai sword that embodies the fleeting beauty of cherry blossoms and the noble spirit of the samurai warrior. This differentially tempered katana combines traditional Japanese craftsmanship with modern forging techniques, resulting in a stunning and functional piece of art.

Our Spring Sakura Katana represents this beautiful Japanese metaphor of the transience of life. The blackened fuchi, kashira and ornate stainless cherry blossom tsuba accents the forged and through-hardened 27" blade.

This Springfield 1907 Pattern Sling features a WWII pattern with dates. WWI slings with brass hardware (#803133) were issued with early production M1 Garands and WWII issue Springfields can use either sling. Also issued with 1917 Enfields.

Our high quality Springfield Bayonet is a replica of the Bayonet that was used during the US Civil War. The bayonet blade is made from hand forged high carbon tempered steel. Includes a black leather sheath with brass fittings.

Our Spun Lager Half Pint Pewter Tankard measures 4.13 inches tall by 2.95 inches wide. We are proud of their long history and tradition within the pewter ware industry but are also not afraid to modernize and produce items.

Our Spun Lager One Pint Pewter Tankard measures 5.51 inches tall by 3.54 inches wide. This one pint lager tankard stands alone among our range of tankards with its modern, sleek and stylish bell shaped body.

Our Square Celtic Knot Button measures 7/8 of an inch by 7/8 of an inch. Our Square Celtic Knot button is made from lead free pewter in the USA. Our button features a sturdy shank on the back to attach to your garment by sewing it on.

Our Square Celtic Knot Pewter Pendant measures 2 inches in diameter and comes on a 36 inches long black cotton 2.5 mm cord ready to wear. It is cast from lead free pewter in the USA. 

The Roman trooper typically carried at least one Square Pilum, a tool as intrinsic to Roman combat tactics as the short sword. The Pilum had a long, relatively soft iron shaft, which though certainly capable of penetrating its intended target.

Our Square Scroll Button come with a beautiful detailed scroll pattern. This button is 7/8 inches square. Each button is made with fine pewter and hand buffed to a warm satin finish. It would be great for any sewing, knitting, or costuming project.  

Aspiring archers, this Squire Bow is your path to greatness. Crafted with a fibreglass core and suede covering, it provides an authentic archery experience tailored for LARP, beginners and youth. With a draw weight of 24-26 lbs, it's perfect for honing your skills without overpowering you. Embellished with leather details, this bow blends functionality and style, making it ideal for LARP, reenactment, or simply embracing your inner archer.

Aspiring archers, this Squire Bow is your path to greatness. Crafted with a fibreglass core and suede covering, it provides an authentic archery experience tailored for LARP, beginners and youth. With a draw weight of 24-26 lbs, it's perfect for honing your skills without overpowering you. Embellished with leather details, this bow blends functionality and style, making it ideal for LARP, reenactment, or simply embracing your inner archer.

Aspiring archers, this Squire Bow is your path to greatness. Crafted with a fibreglass core and suede covering, it provides an authentic archery experience tailored for LARP, beginners and youth. With a draw weight of 24-26 lbs, it's perfect for honing your skills without overpowering you. Embellished with leather details, this bow blends functionality and style, making it ideal for LARP, reenactment, or simply embracing your inner archer.

As a squire, your path to knighthood requires unwavering dedication and tireless training. The Squire Short Sword from Epic Armoury is the perfect companion for honing your skills, crafted with impressive durability and detail to withstand the rigors of your journey.

Aspiring knights, the path to glory begins with the Squire Short Sword from Epic Armoury. This meticulously crafted latex-hybrid sword is your faithful companion, forged to withstand the rigors of training and battle, ensuring you are well-prepared for the challenges that lie ahead.

The Squire Sword is a foam sword of the highest quality for live action role play (LARP) from Calimacil. 32 inches overall, Black Hilt.

Our St. Brynach Cross Cloak Clasp measures 2 inches in diameter each. It is cast from lead free pewter in the USA. There are holes at three points on each side so you can sew the clasp to your garment.  

Our St. George Handle Brass Celtic Brass Band Pint Pewter Tankard measures 5.11 inches tall by 3.14 inches wide. This makes them the ideal commemorative gifts to mark special occasions.

Our St. George Handle with Brass Lip and Base Pint Pewter Tankard measures 5.11 inches tall by 3.14 inches wide. This tankard is a beautiful example of a stylish tankard which brings to mind historic banquets or feasts.

Our St. George Handle With Celtic Design One Pint Pewter Tankard measures 5.11 inches tall by 3.14 inches wide. This outstanding one pint Celtic badge pewter tankard is one of the most striking and stylish items in the whole range of tankards.

Our St. George Handle with Two Celtic Brass Band One Pint Pewter Tankard measures 5.11 inches tall by 3.14 inches wide. This makes them the ideal commemorative gifts to mark special occasions.

Our St. Georgian Handle Pewter Tankard With Brass Lip and Base measures 5.51 inches tall by 3.54 inches wide. All our pewter items are hand crafted from the highest quality lead-free pewter.

Our St. Thistle Handle Pewter Tankard One Pint measures 5.11 inches tall by 3.14 inches wide. The very best gifts for any occasion are those which have a bit of thought put into them, to make them personal to the recipient.

This deluxe version of the 10th century St Wenceslas Helmet is made from 18 gauge steel with etched brass nasal guard, brass trim around the base of the helmet, and includes the brass mail aventail.

The Staff Officer's sword was the sword of choice for Union Officers during the Civil War. This high quality replica has been produced in a manner similar to the original and the result is a appearance that is faithful and even a little time worn!

Our Stag Damascus Sporting Knife blade is hand forged and hand ground in the US using the highest quality tool steel.

This Stag Fury Sporting Knife is designed for detailed, precision cutting. It is just the right size and weight for making sharp, precise cuts in tight areas. Razor sharp to fit the needs of the serious outdoorsman.

Our Stag Handle 3/4 Pint Pewter Tankard measures 5.70 inches tall by 2.50 inches wide. This pewter tankard is made from the finest lead free pewter and also features a Scottish Red Deer Staghorn handle.

Our Stag or Deer Head Pewter Pendant measures 1 1/4 inches in diameter and comes on a 36 inches long black cotton 2.5 mm cord ready to wear. It is cast from lead free pewter in the USA.  

This Stag Pro Hunter Knife is an all-purpose hunting knife with sturdy point blade for hunting, camping and field use. Sized right for all applications. Blade length: 3-1/2" long. Quality leather sheath included.

The Stag Scramasax by Paul Chen / Hanwei is an authentic reproduction of a Viking-era utility knife, perfect for history enthusiasts and collectors alike. This versatile tool combines historical accuracy with practical functionality, making it an ideal addition to any Viking reenactment kit or outdoor gear collection.

This Stage Combat Sabre is based on the military sabres of the 19th Century. These sabre fencing blades are durable enough for sports fencing and are becoming increasingly popular with historical fencers and HEMA (historical European martial arts) practitioners. Made in the UK.

Our Stage Steel Close Combat Medieval Dagger is 1-1/4" wide and 8+" long. The dagger features blunt edges. Overall length 15" (no sheath)

Our Stage Steel Giant O'dachi Sword comes complete with sheath. Curved blade is 40" long. Overall length is 67". (That's over 5-1/2ft long!) Sheath is leather covered and wire wrapped.

Our Stage Steel Japanese Samurai Katana Sword features a blade that is 27 inches. The overall length of the sword is 37 inches. Sword comes with braided leather sheath.

Our Stage Steel Reverse Blade Katana features a blade that is 27" long with overall length of 37". Sheath is leather covered and wire wrapped.

Our Stage Steel Short Viking Sword blunted edges to reduce the chance of injury. Blade is 1-3/4" wide and 20" long. Overall length 26". (No sheath available)

Our Stage Steel Single-Handed Broadsword is intended for theatrical and SCA re-enactment and sword combat practice.

Our Stage Steel Single-Handed Short Sword is intended for sword combat practice or theatrical or SCA re-enactment. The sword features blade with blunt edges. Blade is 1-1/4" wide and 16" long. Overall length is 22" (no sheath)

Our Stage Steel Tai Chi Training Sword features a blade that is 1-1/2" wide and 28" long. Overall length 36" (no sheath)

This battle ready sword features a blunt carbon steel blade that is 1-1/2" wide and 28" long. Overall length is 40". Perfect for stage combat, reenactments, and practice.

These medieval fingerless gauntlets are constructed with a plate armor shell of 18 gauge stainless steel with an inner gauntlet of suede leather. The suede leather interior is durably stitched to thick leather cover to protect it from chafe and contact with the steel shell.

Our Stamped Thistle Pewter Flask 6 Ounces measures 4.72 inches tall by 3.54 inches wide. The perfect commemorative gifts for any occasion, our hip flasks are lovingly crafted from the highest quality lead free pewter.

This Standard Mount Brass Ship's Bell is a polished brass bell that has a rich tone when struck. Hand-crafted in solid brass, it comes with a bulkhead / wall mount bracket that allows it to be easily removed from the bracket and stored when not in use.

This Steampunk Box with Compass measures approximately 6.25 inches in length. Made from cold cast resin with hand painted details. Colors may vary slightly due to hand painting.

Perfect for completing any steampunk look, this shirt is made in blended linen and has puffy sleeves. The round collar has two buttons, and the well-fitted cuffs have three buttons each.

Perfect for completing any steampunk look, this shirt is made in blended linen and has puffy sleeves. The round collar has two buttons, and the well-fitted cuffs have three buttons each.

This Steampunk Chronometer Gear Stick Pin is made with fine pewter in the US and can be used to hold a tie or cravat in place, or worn on a hat or lapel. The gear measures 1 1/4 inches in diameter.  

These Steampunk Clock Gear Cuff Links measure 1 1/4 inches in diameter. Hand cast in the US from lead free pewter, these gears are then soldered to solid brass cuff links.

Our Steampunk Clock Gear Cuff Links measure 15/16 inches in diameter. It's the details that make the difference, and these gear cuff links are the perfect finishing touch. 

This Steampunk Dragon Box is made from cold cast resin with hand painted details. Approximately 5 inches long.

This Steampunk Engineer Shirt is made from a soft linen blend fabric. Puffy sleeves and finely detailed buttons finish the look of this well-crafted shirt.

The Steampunk Fairy is the Midwife to the Birth of the Machine Age. Magic, gears and leather. Starlight, brass and glass lenses. Magic is one of her tools, mechanics part of her magic.

Our Steampunk Gear Button is the perfect finishing touch for any Steampunk garment. They have a sturdy shank on the back of the button to securely attach it to your garment by sewing it on. This is hand cast from lead free pewter in the USA. 

These fine pewter buttons are the perfect finishing touch for any Steampunk garment. All of these gear buttons have two holes for you to sew through. They are hand cast from lead free pewter in the U.S.

Our Steampunk Gizmo Button measures 13/16 of an inch in diameter. It is cast in lead free pewter in the U.S. These are great for costumes or for any great designers.  There is a study shank on the back ready to be sewn on to your garment.

The Steampunk Gizmo Cuff Links measure 13/16 of an inch each in diameter. Hand cast in lead free pewter in the US.

This Steampunk Octopus Box measures approximately 5.5 x 4 x 3.5 inches. Made from cold cast resin with hand painted details. 

This Steampunk Octopus Statue measures 5.75 inches tall. Made from cold cast resin with hand painted details, this goggled cephalopod adds a whimsical touch to your steampunk decor.

Our Steampunk Pirate Button is a gear button with the etching of a Victorian Skull in the center. Great for Pre-wreck salvagers. Cast in lead free pewter in the USA, This button measures 1.5 inches in diameter.

This Steampunk Pistol is made from cold cast resin and hand painted. Intended for display, it measures approximately 8 inches long.

Our Steampunk Quilted Heels are a quilted look oxford shoe with a 2.5" heel available in 3 colors.

Our Steampunk Sew-Through Brass Gear Button offers the perfect finishing touch for your steampunk outfit. These gear buttons have two holes for you to sew through. They work just like shirt buttons. 

This Steampunk Wall Clock is made from cold cast resin with hand painted details. Approximately 10 inches in diameter. This is a working clock. Operates on 1 AA battery (not included).

Our Steampunk Watch Cuff Links offer the perfect finishing touch for any Steampunk look. 3/4 of an inch in diameter, these watch innards are soldered to solid brass cuff links. Hand cast from lead free pewter in the US.

Our Steampunk Watch Gear Necklace measures 1 1/4 inches in diameter and comes on a 36 inches long black cotton 2.5 mm cord ready to wear. It is cast from lead free pewter in the USA. 

Here's just the thing the Steampunk guy or gal with glasses needs to finish their outfit- a horological steampunk eyepiece. Clips on glasses, providing the wearer with a magnifying lens and our patented Chronometer's Sighting Sprocket. Made in lead free pewter in the US.

This Steampunk Winged Heart Clock measures approximately 26.5 inches long. Made from cold cast resin and hand painted. Runs On 1 AA Battery, not included.

This set of knee armor is constructed from 18 gauge steel. The armor is fitted to the back of the leg with an integrated leather strap and brass buckle. The interior of the armor is blackened. Additional panels of thick leather provide chafe protection from the armor.

Epic Armoury's Dark Steel Bazuband is an elegant and functional piece of arm armor designed to protect your forearms while providing comfort and freedom of movement. This robust steel plate effectively guards the back of your hand, thumb, and underarm, while strong chainmail connects the plates, allowing for unrestricted yet protected movement.

Epic Armoury's Polished Steel Bazuband is an elegant and functional piece of arm armor designed to protect your forearms while providing comfort and freedom of movement. This robust steel plate effectively guards the back of your hand, thumb, and underarm, while strong chainmail connects the plates, allowing for unrestricted yet protected movement.